How to Fix Boot Device Not Found Windows 10?
Are you facing the dreaded Boot Device Not Found error in Windows 10? If so, you are not alone. This common error can cause frustration and confusion, but the good news is that it can usually be fixed relatively quickly and easily with the right knowledge. In this article, we will look at the different causes of this error and provide you with some tips and tricks on how to fix the Boot Device Not Found error in Windows 10.
Fixing the Boot Device Not Found Error in Windows 10:
- First, restart your computer and enter the BIOS setup.
- Then, check the boot order settings and make sure that your hard drive is the first boot device.
- Next, check the cables connecting the hard drive and make sure that they are connected properly.
- If the issue still persists, then you can try to reinstall or update the SATA drivers.
- Finally, if the issue still persists, then you can try to use the Windows 10 recovery drive to repair your system.
Troubleshooting Boot Device Not Found Error on Windows 10
Boot device not found is a very common issue in Windows 10. It can be caused by several factors and can lead to a variety of errors. Fortunately, there are a few simple steps that you can take to resolve this issue. In this article, we will discuss how to fix boot device not found Windows 10 errors.
Check the Hard Drive
The first step to take when troubleshooting boot device not found errors is to check your hard drive. Ensure that the hard drive is properly connected to the motherboard, and that it is securely fastened in place. If the hard drive is loose, it could be causing the boot device not found error. Additionally, check the power cable and data cable that connects the hard drive to the motherboard. Make sure that they are securely connected and that the cables are not damaged.
Verify Boot Order
The next step is to verify the boot order. The boot order is a list of devices that your computer will attempt to boot from. This list is usually found in the BIOS or UEFI settings. Make sure that the hard drive is listed as the first device in the boot order. If the hard drive is not listed, you may need to add it manually.
Run Windows Startup Repair
If you are still experiencing boot device not found errors, you may need to run Windows Startup Repair. This is a tool that can help to repair any errors that may be preventing your computer from booting properly. To run Windows Startup Repair, insert your Windows installation disc and restart your computer. Then, follow the on-screen instructions to begin the repair process.
Update the BIOS
If you are still having issues booting your computer, you may need to update the BIOS. BIOS updates often contain fixes for boot device issues, so it is always a good idea to check for updates. You can usually download the latest version of the BIOS from the manufacturer’s website.
Change the SATA Mode
Finally, if you are still experiencing boot device not found errors, you may need to change the SATA mode. This is a setting in the BIOS or UEFI that will determine how data is transferred between the hard drive and the motherboard. Make sure that the SATA mode is set to the correct setting for your hard drive.
Check the Hard Drive Cables
If your hard drive is properly connected, you may have a faulty cable. Check the power and data cables that connect the hard drive to the motherboard. Make sure that they are securely connected and that the cables are not damaged.
Test the Hard Drive
If you have verified that the hard drive is properly connected and the cables are not faulty, you may need to test the hard drive for errors. You can use a tool such as the Windows Disk Check utility to test the hard drive. If there are errors, you may need to replace the hard drive.
Run System Restore
If the issue persists, you may need to run System Restore. This is a tool that can help to restore Windows to a previous state. System Restore can help to fix boot device not found errors, as well as many other errors.
Few Frequently Asked Questions
Question 1: What Is a Boot Device Not Found Error?
Answer: A boot device not found error is an indication that a connected storage device, such as a hard drive or optical drive, isn’t being detected by the system. This can be caused by a number of issues, from a disconnected cable or loose connection, to a corrupted driver or faulty hardware.
Question 2: What Are the Symptoms of Boot Device Not Found?
Answer: The most common symptom of a boot device not found error is a message on your computer’s startup screen that reads “No bootable device found.” This message indicates that the computer cannot locate the necessary files to boot up the operating system. Other symptoms include a black screen with an error message, a flashing cursor, or a blank screen with no error message.
Question 3: What Causes Boot Device Not Found Error?
Answer: The most common cause of a boot device not found error is a hardware issue, such as a disconnected or loose cable connection or a faulty hard drive. Software-related issues, such as corrupted drivers or incorrect BIOS settings, can also cause this error. Additionally, a boot device not found error can be caused by a virus or malicious software.
Question 4: How Can I Fix Boot Device Not Found Windows 10?
Answer: In order to fix boot device not found Windows 10, you should first check the connections of all storage devices to ensure that they are properly connected and secured. If the issue persists, try updating the BIOS and resetting the BIOS settings to default. You should also check for any corrupted or outdated drivers and make sure that the boot order is set correctly. If the issue persists, you may need to restore or reinstall Windows 10.
Question 5: How Can I Check the Boot Order?
Answer: In order to check the boot order, you will need to access the BIOS menu. To do this, restart your computer and press the appropriate key to enter the BIOS menu (this will usually be a function key such as F2, F8, or Del). Once you have accessed the BIOS menu, navigate to the “Boot” tab and make sure that the correct storage device is set as the first boot device.
Question 6: How Can I Reset the BIOS Settings?
Answer: Resetting the BIOS settings can help to resolve a boot device not found error. To reset your BIOS settings, access the BIOS menu and navigate to the “Reset” tab. Once you are on the Reset tab, select the “Restore Defaults” option. This will restore all of the BIOS settings to their factory defaults. Once the settings have been reset, you can save the changes and restart your computer.
HP Laptop Fix – Boot Device Not Found – Hard Disk (3F0)
To conclude, if you are having trouble with your Windows 10 system and are experiencing the “Boot Device Not Found” error message, there are several methods you can use to fix the issue. Whether you choose to use a system repair disk, check the BIOS settings, or try a clean installation of Windows, you should be able to get your system up and running again in no time. If all else fails, you might want to consult a professional technician to help you out.