How to Loop a Powerpoint Presentation on a Tv?

Are you looking for a way to show your presentations on TV without having to start it all over again after it ends? Well, you’re in luck! With the right setup, you can loop your PowerPoint presentation on TV and make sure that your slides are always on display. In this article, you’ll learn how to do just that with easy-to-follow instructions. So, let’s get started and find out how to loop your PowerPoint presentation on TV!

Steps to Loop a PowerPoint Presentation on a TV

Looping a PowerPoint presentation on a television is a great way to deliver a presentation to a large audience. This article will provide step-by-step instructions on how to do this.

Step 1: Connect the Computer to the TV

The first step is to connect the computer running the PowerPoint presentation to the television. This can be done in several ways, depending on the type of connections available on the computer and TV. If both the computer and TV have HDMI ports, then an HDMI cable can be used to connect them. If the computer and TV don’t have HDMI ports, then an analog connection, such as a VGA cable or composite video cable, can be used.

Step 2: Set the TV to the Correct Input Source

Once the computer and TV are connected, the next step is to set the TV to the correct input source. This is usually done by pressing the input button on the remote control. This will bring up a list of available input sources. Select the one that is connected to the computer.

Step 3: Open the PowerPoint Presentation

Once the TV is set to the correct input source, open the PowerPoint presentation on the computer. Make sure that the presentation is set to run in full-screen mode so that it fills the entire TV screen.

Step 4: Enable the Loop Option

The next step is to enable the loop option. This can be done by clicking on the Slide Show tab in the ribbon menu at the top of the PowerPoint window. Then click on the “Set Up Slide Show” button in the ribbon menu and select the “Loop continuously until ‘Esc'” option.

Step 5: Start the Presentation

Once the loop option is enabled, the presentation can be started by pressing the F5 key on the computer’s keyboard. The presentation will then start running on the TV, and it will loop continuously until the F5 key is pressed again.

Step 6: Disconnect the Computer from the TV

Once the presentation is finished, the computer can be disconnected from the TV by disconnecting the cable that is used to connect them. This will ensure that the presentation will not continue to run on the TV.

Frequently Asked Questions

What is a Loop Presentation?

A loop presentation is a type of presentation in which slides are displayed in a continuous loop, or cycle. This can be useful for trade shows, conferences, and other events where the same presentation is displayed for a long period of time. It can also be used to create an interactive display with slides that change on a timed interval.

What is Required to Create a Loop Presentation?

In order to create a loop presentation, you will need a computer with PowerPoint installed, a television or projector, and a connection method between the two. Depending on the type of television or projector, this could involve an HDMI cable, VGA cable, or other types of cables.

How do I Set Up a Loop Presentation?

After you have the necessary hardware and cables, setting up a loop presentation is relatively easy. First, open the PowerPoint presentation on the computer. Then, connect the computer to the television. Finally, set the PowerPoint to loop in the slideshow settings, and the presentation should automatically play on the television in a loop.

What Features Can I Include in a Loop Presentation?

A loop presentation can include any features you would normally have in a standard PowerPoint presentation. This could include animations, transitions, audio and video clips, and more. You can also set the loop to change at a set interval, so that different slides are displayed at different times.

What are the Benefits of a Loop Presentation?

Loop presentations are a great way to keep viewers engaged with a presentation for a long period of time. They can also be used to create an interactive display, as different slides can be displayed on a timed interval. Loop presentations are also more efficient than constantly resetting a presentation, as the same presentation can be displayed for hours or days without needing to be reset.

Are There Any Drawbacks to a Loop Presentation?

The main drawback of a loop presentation is that it can become monotonous if it is displayed for too long. As such, it’s important to make sure that the loop presentation is engaging, and that it changes frequently enough to keep viewers interested. Additionally, if the loop presentation is not set up correctly, it could cause problems with the television or projector.


If you’re looking to loop a PowerPoint presentation on a TV, you now have the knowledge and resources to do so with ease. By using the appropriate cables, connecting it to the right ports, and setting the PowerPoint to loop, you can create a seamless, visually stimulating slideshow that will capture your audience’s attention. With this knowledge in hand, you’re now ready to create a professional and engaging presentation.